Digital Number System

28 May 2017, Manish Padhi

A digital system can understand positional number system only where there are only a few symbols called digits and these symbols represent different values depending on the position they occupy in the number.

A value of each digit in a number can be determined using

  • The digit

  • The position of the digit in the number

  • The base of the number system (where base is defined as the total number of digits available in the number system).

 

1. Decimal Number System

The number system that we use in our day-to-day life is the decimal number system. Decimal number system has base 10 as it uses 10 digits from 0 to 9. In decimal number system, the successive positions to the left of the decimal point represent units, tens, hundreds, thousands and so on.

Each position represents a specific power of the base (10). For example, the decimal number 1234 consists of the digit 4 in the units position, 3 in the tens position, 2 in the hundreds position, and 1 in the thousands position, and its value can be written as

(1x1000)+ (2x100)+ (3x10)+ (4xl)

(1x103)+ (2x102)+ (3x101)+ (4xl00)

1000 + 200 + 30 + 1

1234

As a computer programmer or an IT professional, you should understand the following number systems which are frequently used in computers.

S.N.Number System & Description
1 Binary Number System
Base 2. Digits used: 0, 1
2 Octal Number System
Base 8. Digits used: 0 to 7
4 Hexa Decimal Number System
Base 16. Digits used: 0 to 9, Letters used: A- F

 

2. Binary Number System

Characteristics

  • Uses two digits, 0 and 1.

  • Also called base 2 number system

  • Each position in a binary number represents a 0 power of the base (2). Example 20

  • Last position in a binary number represents a x power of the base (2). Example 2x where x represents the last position - 1.

e.g.

Binary Number: 101012

Calculating Decimal Equivalent:

StepBinary NumberDecimal Number
Step 1 101012 ((1 x 24) + (0 x 23) + (1 x 22) + (0 x 21) + (1 x 20))10
Step 2 101012 (16 + 0 + 4 + 0 + 1)10
Step 3 101012 2110

Note: 101012 is normally written as 10101.

 

3. Octal Number System

Characteristics

  • Uses eight digits, 0,1,2,3,4,5,6,7.

  • Also called base 8 number system

  • Each position in a octal number represents a 0 power of the base (8). Example 80

  • Last position in a octal number represents a x power of the base (8). Example 8x where x represents the last position - 1.

e.g.

Octal Number: 125708

Calculating Decimal Equivalent:

StepOctal NumberDecimal Number
Step 1 125708 ((1 x 84) + (2 x 83) + (5 x 82) + (7 x 81) + (0 x 80))10
Step 2 125708 (4096 + 1024 + 320 + 56 + 0)10
Step 3 125708 549610

Note: 125708 is normally written as 12570.

 

4. Hexadecimal Number System

Characteristics

  • Uses 10 digits and 6 letters, 0,1,2,3,4,5,6,7,8,9,A,B,C,D,E,F.

  • Letters represents numbers starting from 10. A = 10. B = 11, C = 12, D = 13, E = 14, F = 15.

  • Also called base 16 number system

  • Each position in a hexadecimal number represents a 0 power of the base (16). Example 160

  • Last position in a hexadecimal number represents a x power of the base (16). Example 16xwhere x represents the last position - 1.

e.g.

Hexadecimal Number: 19FDE16

Calculating Decimal Equivalent:

StepHexa NumberDecimal Number
Step 1 19FDE16 ((1 x 164) + (9 x 163) + (F x 162) + (D x 161) + (E x 160))10
Step 2 19FDE16 ((1 x 164) + (9 x 163) + (15 x 162) + (13 x 161) + (14 x 160))10
Step 3 19FDE16 (65536+ 36864 + 3840 + 208 + 14)10
Step 4 19FDE16 10646210

Note: 19FDE16 is normally written as 19FDE.

Did you like this article ? Let us know! You may also like –
RBI Grade B Phase-1

Vedas-II

Vedas-II

The Vedas